6002 Bearing Dimensions and Cross Reference
6002 = 15 mm bore, 32 mm OD, 9 mm width; deep groove ball bearing, ISO 15.
Verified dimensions
| Bore (d) | 15 mm |
|---|---|
| Outer Diameter (D) | 32 mm |
| Width (B) | 9 mm |
| Type | Deep Groove Ball Bearing |
| Standard | ISO 15 |
In the diagram and table, d is bore diameter, D is outside diameter and B is width.
Sources and evidence
Boundary dimensions are traced to the cited standard. Brand designations and suffixes are checked against the official catalog entry linked for each manufacturer.
Cross-Reference by Brand
| Brand | Part No. | Contact seal | Shield | Boundary dims | Catalog |
|---|---|---|---|---|---|
| SKF | 6002 | 2RSH | 2Z | match | SKF catalog ↗ |
| NSK | 6002 | DDU | ZZ | match | NSK catalog ↗ |
| FAG | 6002 | 2RSR | 2ZR | match | FAG catalog ↗ |
| NTN | 6002 | LLU | ZZ | match | NTN catalog ↗ |
| KOYO | 6002 | 2RS | ZZ | match | KOYO catalog ↗ |
| NACHI | 6002 | 2NSE | ZE | match | NACHI catalog ↗ |
| Timken | 6002 | 2RS | ZZ | match | Timken catalog ↗ |
| INA | 6002 | 2RSR | 2ZR | match | INA catalog ↗ |
Interchange notes
For 6002, match all three ISO 15 boundary dimensions: 15 mm bore, 32 mm outside diameter and 9 mm width. A nearby 6000-series designation is not a dimensional substitute by series alone.
For 6002, the verified contact-seal suffixes are SKF 2RSH, NSK DDU, FAG/INA 2RSR, NTN LLU, KOYO/Timken 2RS and NACHI 2NSE. Shielded codes vary by brand between 2Z, ZZ, 2ZR and ZE.
Manufacturer checks before substitution
Confirm load rating, speed limit, internal clearance, precision class, lubrication and application suitability in the official manufacturer catalog for the exact brand and suffix. This page does not supply those values or make an application recommendation. Review the interchange rules before selecting a substitute.
Where to buy a 6002
Compare current listings and prices for the 6002 across brands and sellers:
Search 6002 bearings on eBay ↗
As an eBay Partner Network affiliate, this site may earn a commission from qualifying purchases made through this link, at no extra cost to you.
FAQ
What are the exact dimensions of a 6002 bearing?
A 6002 has a 15 mm bore, 32 mm outside diameter and 9 mm width under ISO 15.
Which contact-seal code is used for 6002 by NTN and NACHI?
The verified table lists NTN 6002-LLU and NACHI 6002-2NSE. Check the linked manufacturer catalog for construction details.
Can another 6000-series bearing replace a 6002?
Series membership alone is not enough. The candidate must match the 6002 boundary envelope of 15×32×9 mm and the required variant before further catalog checks.
Related sizes
Boundary-dimension cross-reference only. Per the applicable ISO standard (ISO 15 for ball, ISO 355 for tapered), the boundary dimensions are common across brands, so the mounting envelope is interchangeable. This is NOT a drop-in part equivalence. Internal clearance, precision class, seal/shield type (where applicable), cage material and factory lubrication are encoded in brand-specific suffixes and must be matched separately. Always verify against the manufacturer's catalog before substituting.